WACKER NEUSON>>
Heaters>> WN Hydronic Surface Heaters – E3000ES – Efficient, durable and user-friendly.
Standard Features
WN Hydronic Surface Heaters - E3000ES
Engineered for reliable performance and trouble-free starts for up to 101 hours of run time, the E3000ES will provide maximum flow and ensure consistent heat delivery for thawing and curing applications. The E3000ES thaws or cures up to 6,000 sq. ft. With accessories this heater will cure up to 12,000 sq. ft. or provide 360,000 cu. ft. of dry heat at 84% efficiency, the highest in the industry.
With 3,000 ft. of hose and a hydraulic hose system, the E 3000 allows for single person set-up and placement, for greater flexibility on all applications.
Positive displacement pump provides maximum flow and consistent heat delivery for thawing and curing. One pump per hose loop means delivery of maximum Btu's per hour.
Digital temperature controller with push button adjustment allows operators to easily adjust Heat Transfer Fluid (HTF) output temperature for all concrete curing applications.
Performance monitoring strobe light indicates from a distance that all systems are operating properly.
Several options are available including a 3 kW or 5 kW liquid-cooled diesel generator.
E3000ES Spec. Sheet
Engine/Motor
Engine/Motor:
2 Cylinder Liquid Cooled
Engine/Motor Manufacturer:
Kubota
Displacement:
29.23 in³
36.5 in³
Operating Performance:
5 kw / 11.1 hp
3 kw / 16.8 hp
RPM / Speed Operating:
3000
3600
Tank Capacity Oil:
2 qt.
2.64 qt.
Tank Capacity Fuel:
115 gal.
Fuel Type:
Winter-Blend Diesel
Fuel Consumption:
Generator 0.6 - 0.28 gal./h
Burner 1.81 | 2.2 | 1.81 gal./h
Heating Power:
252,000 BTU/h
General Info
Manufactures:
Wacker Neuson
Model:
E3000ES
E3000ES W/ 5kW Gen
E 3000ES W/ 3kW Gen
Measurements
Empty Weight:
5,725 lbs
6,250 lbs
6,370 lbs